McNix Golf

Custom Golf Clubs
Custom Fit & Biomechanically Balanced For
Your Swing
by - Roy Nix - Golf Professional • Club Fitting Professional
Founder & Director of the AGCP
Association of Golf Clubfitting Professionals

Golf Store

Inovative Designs - Hybrids & Award Winners

770CFE Computer Face Engineered Irons
Features:

1. Model 770CFE irons represent the first set of irons designed with a ultra-thin, forged steel, CNC machined, variable thickness face design
2. The 770CFE irons are designed with a variable thickness forged face to offer golfers a higher ball-speed-to-swing speed ratio than is possible with a conventional thick face iron design, but also to offer golfers a much better off-center hit forgiveness because of the variable thickness face design
3. Because irons increase in loft progressively through the set, the actual force of deflection of the face will decrease as loft increases. To help maximize the amount of face deflection as loft increases in the irons, the forged variable thickness face design changes in steel alloy composition and thickness. The #3 and 4 iron faces are forged from Carpenter 455 high strength steel, designed with a variable thickness of 2.4mm/1.9mm. The #5, 6, and 7 iron faces are forged from 17-7 stainless steel and machined to a variable thickness of 2.5mm/2.0mm. The #8 through wedge faces are forged from soft 304 stainless and machined to a variable thickness of 2.6mm/2.2mm
4. In addition, as loft increases in a set of irons, the actual position of impact on the face will change. To accommodate this natural tendency in iron impact position, the thicker center section of the faces changes in position on each 770CFE iron through the set
   - The 770CFE irons are individually computer modeled for face thickness dimension, face thickness position, and face material for each iron in the set to offer the best individual performance possible in a full set of irons
5. All 770CFE faces are CNC machined after forging to ensure precision in the face design. The CNC machining marks can be seen on the back of each face
6. The body of each 770CFE iron is designed to maximize the area of the face available for face deflection, as well as to move as much of the weight of each head further back from the face and shaft centerline to assist in launch angle
7. The sole design of the 770CFE is designed to keep a large amount of mass low, but by beveling the back edge of the sole the sole width is not so wide to ensure proper sole playability from all types of turf and lie conditions.
8. 770CFE irons are finished in a bright satin polish finish, with all faces CNC machined for precision dimensional specifications.

Awards:

• 770CFE irons were awarded the Golf Tips Magazine's Top Concept Tech Award for 2005.
• Golf Tip magazine's Comment: "One of the more intriguing iron sets is the 770CFE by Tom Wishon, which represents the first iron to feature a forged, variable-thickness face. The variable face thickness provides a higher ball speed-to-swing ratio and greater forgiveness. Also, the face is constructed of three different steel strengths in an attempt to maximize face deflection, which typically decreases as loft increases. For the layman in all of us, the 770CFE means more distance, more forgiveness and a more consistent trajectory from iron to iron."
• 770CFE irons also received the Golf Digest Hot List 2005 award for the Best Iron from a New Company...
• Golf Digest's Comment: "I could become infatuated with this club. Everything felt sweet off the clubface."
• E. Michael Johnson, Golf Digest, Equipment Pane

785HF Hybrid Irons
Features:

1. TWGT is proud to introduce another design "first" with the 785HF (Hot Face) irons; the first full set of true hybrid body irons intended to be a full set alternative to conventional thin body irons
2. #2 - 9, PW available, each iron is a 2-piece investment cast construction, with super thin, high COR face
3. Face Profile shapes progress taller from long through short irons and wedge in the manner of conventional iron face profiles
4. 785 Hot Face irons are designed with progressively thinner faces, each forged and machined from the same alloy used to make the first 0.830 COR fairway woods in the game - Wishon Golf's 515GRT
5. 785HF soles are "split-level" designed to reduce actual sole to turf contact to make each 785 head. Play more like a conventional wide-sole iron
6. 0.335" bore on #2 through 6, 0.370" bore on the #7 through PW - allows use of high launch GI-335 graphite or Series 5 Hybrid steel in the low lofted irons, but a conventional iron shaft in the short, high lofted irons

730CL Hybrid Iron
Features:

1. The #5, 6/7, 8/9 hybrid body 730CL irons, combined with the conventional PW and DW have 6° loft increment for adequate distance difference between clubs for the golfer with slower swing speed
2. 730CL Hybrid iron face heights progress in face height - wedge face profiles designed to blend in face profile to the 8/9 hybrid iron
3. The 5, 6/7, 8/9 hybrid body irons are designed for installation with Wishon Golf's high launch, small tip iron shaft designs, the GI-335 or 730CL
4. The conventional shaft tip design in the wedges affords more control when a higher flight is already assured by the loft angles
5. "Split-level Sole" design of the 730CL hybrid body irons plays like wide sole conventional iron
    

585HI Hybrid Long Irons
Long iron replacement hybrids with the appearance of a conventional iron
Features

1. Conventional iron shape, profile and appearance in a true hybrid long iron replacement design, designed to be custom built to iron lengths.
2. 0.335" bore to match with TWGT's graphite and steel hybrid shafts, one of the real secrets to TWGT's high performance hybrid designs.
3. Perfect sole design for a wide sole shape - no bounce, raised/radiused leading edge and wall thickness to ensure low and rear CG position for higher launch angle.
4. Designed in #2, 3, 4 and 5 iron lofts to replace those hard to hit conventional irons in a design that looks like an iron.
5. Micro-groove scorelines to enhance backspin for higher trajectory and better bite for long distance shot into the green

321LI Hybrid Long Irons
Features:

1. Model 321Li hybrid long irons are the ultimate in true hybrid long iron design due to the accompanying design of the matching GI-335 graphite or the Series 5 Steel small tip iron shafts
2. TWGT research has shown that the shaft can be a visible contributor to the launch angle, but only if the shaft is designed to bend/deflect an amount much greater than is typical with a conventional iron shaft. Typical iron shafts have a larger tip diameter which can only bend/deflect 1-2" in the swing. The GI335 and Series 5 Steel .335 shaft are designed with the same butt stiffness as a conventional iron shaft, but with a small tip design to increase the launch angle and trajectory of the shot
3. 321Li full hybrid long iron heads are designed in a #1, 2, 3, 4, 5 and 6-iron. Matched with any set of irons, the 321Li offers golfers a much higher trajectory from the bending of the unique small iron tip design of the GI-335 and Series 5 Steel shafts
4. 321Li full hybrid long iron heads are designed with a hosel to face position that is much more like a true iron for the proper appearance and set up at address
5. A cross-section view of the wall thickness of the 321Li head design shows another reason for the easy playability of this model - the rear wall of each 321Li is extremely thick to pull the CG farther back from the shaft to further assist with increasing the launch angle of the shot
6. 321Li full hybrid long iron heads are finished in an attractive dark grey metallic with bright satin highlights on the sole and toe/heel